Choose from our hand picked telemetry options and find your best fit.
Showing all 15 results
SkyDroid T10 radio with FPV camera and receiver The SkyDroid T10 has a range of 10KM for video and 20km for telemetry and radio link. It has an FPV camera that connects to the receiver and the receiver plugs into the telemetry port of your Pixhawk flight controller and the SBUS port for radio link….
WIFI Telemetry module for Pixhawk
These will give you 100m if connected direct to Tablet or if you use an Access point with directional antenna you will get up to 3 miles.
These have a built in web server so you connect to them over Wifi then you point your web browser at the DHCP server IP from your network info. Then you can connect the WIFI telemetry module to your network.
This kit has a Bluetooth 433Mhz SiK Radio telemetry 500mW long range module along with a 500mW air module. The standard version is 100mW.
It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.
It has a built in Lipo battery that is charged by plugging it into a USB port.
It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
Connection via USB is also used to update settings on the module.
This is the ground module unit only and does not include the remote unit that goes on the model.
The PIN code for pairing these is 0008
This kit has two 915Mhz SiK Radio telemetry 500mW long range modules with USB cable, micro USB to Micro USB OTG cable and antenna adaptors
This kit has a Bluetooth 433Mhz SiK Radio telemetry 500mW long range module along with a 500mW air module. The standard version is 100mW.
This radio telemetry system has bluetooth ground module connectivity. This provides a convenient way to connect to the ground module so it can be mounted on a pole. By mounting the ground module higher gives much longer ranges. Range can be up to 5km or 15km with V antennas.
It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.
This is the complete kit so includes the ground module unit and the remote unit that goes on the model.
This kit has a Bluetooth 915Mhz SiK Radio telemetry 500mW long range module along with a 500mW air module. The standard version is 100mW.
This radio telemetry system has bluetooth ground module connectivity. This provides a convenient way to connect to the ground module so it can be mounted on a pole. By mounting the ground module higher gives much longer ranges. Range can be up to 5km or 15km with V antennas.
It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.
This is the complete kit so includes the ground module unit and the remote unit that goes on the model.
This unit is a Bluetooth 433Mhz SiK Radio telemetry 500mW long range module. The standard version is 100mW.
It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.
It has a built in Lipo battery that is charged by plugging it into a USB port.
It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
Connection via USB is also used to update settings on the module.
This is the ground module unit only and does not include the remote unit that goes on the model.
The PIN code for pairing these is 0008
This unit is a Bluetooth 915Mhz SiK Radio telemetry 500mW long range module. The standard version is 100mW.
It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.
It has a built in Lipo battery that is charged by plugging it into a USB port.
It can also plug into the USB port of your laptop to connect directly over the 915Mhz telemetry without the bluetooth link.
Connection via USB is also used to update settings on the module.
This is the ground module unit only and does not include the remote unit that goes on the model.
The PIN code for pairing these is 0008
This adapter board present your flight data live on your Radio screen. Battery level, flight mode, distance, altitude etc it even talks to you.
This antenna is tuned to 915Mhz to greatly increase the range of your 3DR Radio.
Perfect V shape to give maximum range your your 3DR Radio telemetry gear.
Please note these are for 915Mhz 3DR Radios and not for the 433Mhz version. Supplied with an adapter for RP-SMA and SMA.
This antenna is tuned to 433Mhz to greatly increase the range of your 3DR Radio.
Perfect V shape to give maximum range your your 3DR Radio telemetry gear.
Please note these are for 433Mhz 3DR Radios and not for the 915Mhz version. Supplied with an adapter for RP-SMA and SMA.
Pixhawk LCD Display system 1.3″
Mounted in a 3D printed case
Analogue Voltage telemetry for the X4RII receivers on our 250 Racer quadcopters.
No products in the basket.